Issue 16, 2011

Phosphine-free synthesis of Zn1−xCdxSe/ZnSe/ZnSexS1−x/ZnS core/multishell structures with bright and stable blue–green photoluminescence

Abstract

Highly photoluminescent (PL) Zn1−xCdxSe/ZnSe/ZnSexS1−x/ZnS core/multishell nanocrystals were successfully synthesized by a phosphine-free method. Alloyed ZnSexS1−x was chosen as the shell material to epitaxially grow on pre-synthesized Zn1−xCdxSe nanocrystals. By decreasing the molar ratio between Se and S in ZnSexS1−x, the shell composition gradually changed from ZnSe to ZnS. The PL emissions of these core/multishell nanocrystals can be tuned from 450 to 530 nm. The PL quantum yields (QYs) of as-synthesized nanocrystals reached 50 to 75% with full width at half maximum (FWHM) between 28 and 45 nm. By an organic–aqueous phase transfer method, such core/multishell nanocrystals can be transferred into water successfully using an amphiphilic oligomer (polymaleic acid n-hexadecanol ester) as a surface coating agent. It was found that the shell thicknesses of the as-synthesized core/multishell nanocrystals dramatically affected the phase transfer efficiency. Stability tests showed that the water-soluble Zn1−xCdxSe/ZnSe/ZnSexS1−x/ZnS core/multishell nanocrystals with 10 monolayers of shells had very high PL QY and stability in various physiological conditions.

Graphical abstract: Phosphine-free synthesis of Zn1−xCdxSe/ZnSe/ZnSexS1−x/ZnS core/multishell structures with bright and stable blue–green photoluminescence

Supplementary files

Article information

Article type
Paper
Submitted
22 Oct 2010
Accepted
22 Feb 2011
First published
17 Mar 2011

J. Mater. Chem., 2011,21, 6046-6053

Phosphine-free synthesis of Zn1−xCdxSe/ZnSe/ZnSexS1−x/ZnS core/multishell structures with bright and stable blue–green photoluminescence

H. Shen, C. Zhou, S. Xu, C. Yu, H. Wang, X. Chen and L. S. Li, J. Mater. Chem., 2011, 21, 6046 DOI: 10.1039/C0JM03605F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements