Issue 1, 2010

Metal surface nucleated supercritical fluid–solid–solid growth of Si and Ge/SiOx core–shell nanowires

Abstract

High yields of both single-crystalline Si and Ge/SiOx core–shell nanowires were nucleated and grown in metal reactor cells under high-pressure supercritical fluid conditions, without the addition of catalyst particle seeds or a porous template. Nanowire growth was only achieved when the fluid medium of supercritical CO2 and the organometallic precursors were used in conjunction with a coordinating solvent, trioctylphosphine. The diameter and length of the nanowires are found to be in the ranges of 30 to 60 nm and 1 to 10 µm, respectively. The correlation of nanowire growth with the eutectic binary phase diagrams of the semiconductor–metal and the presence of metal impurities at the base of the synthesized nanowires suggest a supercritical fluid–solid–solid growth mechanism occurring from the reaction cell walls. The nanowires are characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy. The electrical characteristics for individually picked nanowires are also investigated by means of mechanical nanoprobing.

Graphical abstract: Metal surface nucleated supercritical fluid–solid–solid growth of Si and Ge/SiOx core–shell nanowires

Supplementary files

Article information

Article type
Paper
Submitted
23 Jul 2009
Accepted
28 Sep 2009
First published
03 Nov 2009

J. Mater. Chem., 2010,20, 135-144

Metal surface nucleated supercritical fluid–solid–solid growth of Si and Ge/SiOx core–shell nanowires

C. A. Barrett, R. D. Gunning, T. Hantschel, K. Arstila, C. O'Sullivan, H. Geaney and K. M. Ryan, J. Mater. Chem., 2010, 20, 135 DOI: 10.1039/B914950C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements