Issue 10, 2003

Direct observation of boron nitridenanocage growth by molecular beam nitridation and liquid-like motion of Fe–B nanoparticles

Abstract

The growth of connected chains of BN nanocages has been achieved by the molecular beam nitridation of nano-sized Fe–B particles. The particles were exposed to ammonia under high vacuum conditions at a temperature of 1000 °C. The experiment was performed in an ultrahigh vacuum chamber built into the column of a high resolution transmission electron microscope enabling direct observation of the process. BN nanocages were observed to form around the Fe–B particles, followed by expulsion of the particles from the cages. Expulsion occurred at a critical shell thickness in a liquid-like manner, despite the experiment being conducted well below the Fe–B liquidus and the particles remained crystalline throughout the experiment. Following expulsion, fresh BN shells formed around the expelled particles, which remained in contact with the previous shell under the influence of surface tension. Chains of connected nanocages were thus formed. The observations provide direct confirmation of the possibility of nanostructure formation by a liquid-like flow of nanocrystalline particles.

Graphical abstract: Direct observation of boron nitride nanocage growth by molecular beam nitridation and liquid-like motion of Fe–B nanoparticles

Article information

Article type
Paper
Submitted
09 Jun 2003
Accepted
25 Jul 2003
First published
27 Aug 2003

J. Mater. Chem., 2003,13, 2573-2576

Direct observation of boron nitride nanocage growth by molecular beam nitridation and liquid-like motion of Fe–B nanoparticles

M. Yeadon, M. Lin, K. P. Loh, C. B. Boothroyd, J. Fu and Z. Hu, J. Mater. Chem., 2003, 13, 2573 DOI: 10.1039/B306406A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements