Issue 5, 2002

Abstract

Gold–silver bimetallic nanoparticles with varying mole fractions were synthesized in water-in-oil microemulsions of water/Aerosol OT/isooctane by the co-reduction of HAuCl4 and AgNO3 with hydrazine at 25 °C. TEM analysis revealed that the bimetallic nanoparticles were essentially monodisperse and had a mean diameter of 4–22 nm, increasing with an increase in the molar ratio of water to Aerosol OT (ω0) and Ag content. The UV/VIS absorption spectra of their solutions exhibited only one plasmon absorption and the absorption maximum of the plasmon band red-shifted almost linearly from 400 to 520 nm with increasing Au ∶ Ag molar ratio, revealing the formation of an alloy. Although the characteristic peaks for Au and Ag were too close to distinguish, the XRD analysis showed that the characteristic peaks for a Au–Ag bimetallic systems became broader and accordingly suggested the formation of bimetallic nanoparticles. The EDX analysis confirmed directly the formation of Au–Ag bimetallic nanoparticles. It showed that the composition of Au–Ag bimetallic nanoparticles was in good agreement with that of the feed solution but the outer layer of the particles was enriched in Ag. The HRTEM study indicated the resultant Au–Ag bimetallic nanoparticles contained single and multiple twins as well as stacking faults, and no mismatch was present. In addition, it was found that the formation rate of Au nanoparticles was much faster than that of Ag nanoparticles. This satisfactorily accounted for the composition distribution within a Au–Ag bimetallic nanoparticle.

Graphical abstract: Formation and characterization of Au–Ag bimetallic nanoparticles in water-in-oil microemulsions

Article information

Article type
Paper
Submitted
23 Nov 2001
Accepted
11 Feb 2002
First published
20 Mar 2002

J. Mater. Chem., 2002,12, 1557-1562

Formation and characterization of Au–Ag bimetallic nanoparticles in water-in-oil microemulsions

D. Chen and C. Chen, J. Mater. Chem., 2002, 12, 1557 DOI: 10.1039/B110749F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements