Issue 10, 1996

Nucleation and crystal growth of analcime from clear aluminosilicate solutions

Abstract

Hydrothermal syntheses of the zeolitic mineral analcime have been carried out in clear aluminosilicate solutions with batch composition Al2O3:84SiO2:87Na2O:2560H2O in the temperature range 130–160 °C and under autogenous pressures. Observation of the changes of the crystal sizes with time indicated that the analcime crystals grew at a constant rate, dependent on the synthesis temperature, and that the rate decreased when the particles settled to the bottom of the autoclave. At that point in the synthesis, a second population of nuclei was observed to form and grow in the solution above the settled crystals. It was demonstrated that when pure forms of silica were used in these syntheses, fewer crystals were formed. These results supported the concept that nucleus formation is promoted by impurities in the silica source.

Article information

Article type
Paper

J. Mater. Chem., 1996,6, 1693-1699

Nucleation and crystal growth of analcime from clear aluminosilicate solutions

G. S. Wiersema and R. W. Thompson, J. Mater. Chem., 1996, 6, 1693 DOI: 10.1039/JM9960601693

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements