Issue 3, 1997

Transport numbers of various anions relative to chloride ions in modified anion-exchange membranes during electrodialysis

Abstract

Modified anion-exchange membranes were prepared by the reaction of a copolymer membrane composed of chloromethylstyrene and divinylbenzene with polyethylenepolyamines such as ethylenediamine, tetraethylenepentamine and polyethyleneimine (molecular weight: 70000) and then trimethylamine. The change in transport numbers of various anions such as bromide, nitrate, sulfate and fluoride, relative to chloride ions, was evaluated by electrodialysis of the mixed solution of the respective sodium salt and sodium chloride. In general, the anion-exchange membranes, modified with polyethylenepolyamines, selectively permeated nitrate and bromide ions rather than chloride ions, compared with the anion-exchange membrane with benzyl trimethylammonium groups though the degree of change differed with the nature of the polyethylenepolyamines. On the other hand, fluoride ions and sulfate ions were difficult to permeate through the modified membranes. In particular, sulfate ions were difficult to permeate through the anion-exchange membrane which had been reacted with tetraethylenepentamine. The change in the relative transport number is mainly related to the increase or decrease in affinity of the respective anions to the modified membranes, which implies a change in the hydrophilicity of the membranes relative to the hydration of the anions.

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans., 1997,93, 457-462

Transport numbers of various anions relative to chloride ions in modified anion-exchange membranes during electrodialysis

T. Sata, T. Yamaguchi, K. Kawamura and K. Matsusaki, J. Chem. Soc., Faraday Trans., 1997, 93, 457 DOI: 10.1039/A606373J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements