Issue 6, 2014

Single-phased white-light-emitting NaCaBO3:Ce3+,Tb3+,Mn2+ phosphors for LED applications

Abstract

A series of NaCaBO3:Ce3+,Tb3+,Mn2+ borate phosphors were prepared via a high-temperature solid-state reaction. The obtained phosphors exhibit a strong excitation band between 250 and 400 nm, matching well with the dominant emission band of a NUV light-emitting-diode (LED) chip. The phosphors can generate light from blue to green, and from blue to red by Ce3+→Tb3+ and Ce3+→Mn2+, respectively. Furthermore, a wide-range-tunable white light emission was obtained by precisely controlling the contents of Ce3+, Mn2+, Tb3+. The results show that this phosphor has potential applications as a single-phased phosphor for NUV white LEDs.

Graphical abstract: Single-phased white-light-emitting NaCaBO3:Ce3+,Tb3+,Mn2+ phosphors for LED applications

Article information

Article type
Paper
Submitted
25 Aug 2013
Accepted
27 Oct 2013
First published
31 Oct 2013

Dalton Trans., 2014,43, 2465-2472

Single-phased white-light-emitting NaCaBO3:Ce3+,Tb3+,Mn2+ phosphors for LED applications

X. Zhang and M. Gong, Dalton Trans., 2014, 43, 2465 DOI: 10.1039/C3DT52328D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements