Issue 29, 2017

Ultralow power switching in a silicon-rich SiNy/SiNx double-layer resistive memory device

Abstract

Here we demonstrate low-power resistive switching in a Ni/SiNy/SiNx/p++-Si device by proposing a double-layered structure (SiNy/SiNx), where the two SiN layers have different trap densities. The LRS was measured to be as low as 1 nA at a voltage of 1 V, because the SiNx layer maintains insulating properties for the LRS. The single-layered device suffers from uncontrollability of the conducting path, accompanied by the inherent randomness of switching parameters, weak immunity to breakdown during the reset process, and a high operating current. On the other hand, for a double-layered device, the effective conducting path in each layer, which can determine the operating current, can be well controlled by the ICC during the initial forming and set processes. A one-step forming and progressive reset process is observed for a low-power mode, which differs from the high-power switching mode that shows a two-step forming and reset process. Moreover, nonlinear behavior in the LRS, whose origin can be attributed to the P–F conduction and F–N tunneling driven by abundant traps in the silicon-rich SiNx layer, would be beneficial for next-generation nonvolatile memory applications by using a conventional passive SiNx layer as an active dielectric.

Graphical abstract: Ultralow power switching in a silicon-rich SiNy/SiNx double-layer resistive memory device

Article information

Article type
Paper
Submitted
11 May 2017
Accepted
29 Jun 2017
First published
03 Jul 2017

Phys. Chem. Chem. Phys., 2017,19, 18988-18995

Ultralow power switching in a silicon-rich SiNy/SiNx double-layer resistive memory device

S. Kim, Y. Chang, M. Kim, S. Bang, T. Kim, Y. Chen, J. Lee and B. Park, Phys. Chem. Chem. Phys., 2017, 19, 18988 DOI: 10.1039/C7CP03120C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements