Issue 16, 2012

The miscibility and depth profile of PCBM in P3HT: thermodynamic information to improve organic photovoltaics

Abstract

Recent work has shown that poly(3-hexylthiophene) (P3HT) and the surface-functionalized fullerene 1-(3-methyloxycarbonyl)propyl(1-phenyl[6,6])C61 (PCBM) are much more miscible than originally thought, and the evidence of this miscibility requires a return to understanding the optimal morphology and structure of organic photovoltaic active layers. This manuscript describes the results of experiments that were designed to provide quantitative thermodynamic information on the miscibility, interdiffusion, and depth profile of P3HT : PCBM thin films that are formed by thermally annealing initial bilayers. It is found that the resultant thin films consist of a ‘bulk’ layer that is not influenced by the air or substrate surface. The composition of PCBM in this ‘bulk’ layer increases with increased PCBM loading in the original bilayer until the ‘bulk’ layer contains 22 vol% PCBM. The introduction of additional PCBM into the sample does not increase the amount of PCBM dispersed in this ‘bulk’ layer. This observation is interpreted to indicate that the miscibility limit of PCBM in P3HT is 22 vol%, while the precise characterization of the depth profiles in these films shows that the PCBM selectively segregates to the silicon and near air surface. The selective segregation of the PCBM near the air surface is ascribed to an entropic driving force.

Graphical abstract: The miscibility and depth profile of PCBM in P3HT: thermodynamic information to improve organic photovoltaics

Article information

Article type
Paper
Submitted
17 Jan 2012
Accepted
15 Feb 2012
First published
17 Feb 2012

Phys. Chem. Chem. Phys., 2012,14, 5635-5641

The miscibility and depth profile of PCBM in P3HT: thermodynamic information to improve organic photovoltaics

H. Chen, R. Hegde, J. Browning and M. D. Dadmun, Phys. Chem. Chem. Phys., 2012, 14, 5635 DOI: 10.1039/C2CP40466D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements