Issue 11, 2011

Observations on PVP-protected noble metallic nanoparticle deposits upon heating via in situsynchrotron radiation X-ray diffraction

Abstract

Through monitoring the evolution of the X-ray diffraction peaks, the phase transformation of PVP-protected Ag and Au nanoparticle deposits (NPDs) on electronic substrates of Cu and Ni upon heating in air was investigated via in situsynchrotron radiation X-ray diffraction. With an increasing temperature, the broad diffraction peak of nano-sized Ag and Au particles with the original average diameters of 4.2 nm and 9.6 nm, respectively, became sharp because of particle coarsening and coalescence. Complex phase transitions among Au, Cu, AuCu3 and CuOx were observed, mainly due to the negative enthalpy of mixing between Au and Cu. The interactions between NPDs and the substrates affected the shift of diffraction peaks to lower angles, caused by thermal expansion and also the temperature for the oxide formation. Compared to Au, Ag NPDs did not form intermetallic compounds with Cu and the formation of copper oxides can also be retarded mainly due to the phase separation feature of the Ag–Cu system.

Graphical abstract: Observations on PVP-protected noble metallic nanoparticle deposits upon heating via in situsynchrotron radiation X-ray diffraction

Article information

Article type
Paper
Submitted
13 Jul 2010
Accepted
13 Dec 2010
First published
07 Feb 2011

Phys. Chem. Chem. Phys., 2011,13, 5099-5104

Observations on PVP-protected noble metallic nanoparticle deposits upon heating via in situsynchrotron radiation X-ray diffraction

J. Song, G. Chiou, W. Chen, S. Chen, T. Kao, I. Chen and H. Lee, Phys. Chem. Chem. Phys., 2011, 13, 5099 DOI: 10.1039/C0CP01159B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements