Issue 29, 2009

Molecular configuration transitions of a nematic liquid crystal encapsulated in organically modified silicas

Abstract

The nematic liquid crystal (LC) 4-n-pentyl-4′-cyanobiphenyl (5CB) was encapsulated as spherical microdroplets dispersed in solid organically modified silica matrices (ORMOSIL), obtained by the sol–gel method. The organic functional groups used to modify the matrix were methyl, ethyl and propyl. The amount of the organic groups in the confining matrix was found to affect the LC surface anchoring properties, and therefore the molecular configurations in the LC droplets. Changes in this molecular configuration by variation of the temperature were identified. The matrix chemical composition–temperature diagrams for the LC configurations were obtained for three sets of ORMOSIL matrices with methyl, ethyl and propyl functionalizations. A radial configuration of the LC droplets is promoted at lower temperatures and higher amounts of modifying groups in the matrix, while a bipolar configuration is obtained at low organic contents and high temperatures. An empirical model was developed to correlate the dependence of the surface anchoring transition phenomena with the chemical composition of the ORMOSIL matrices and the temperature, showing a good correlation with the experimental results.

Graphical abstract: Molecular configuration transitions of a nematic liquid crystal encapsulated in organically modified silicas

Article information

Article type
Paper
Submitted
24 Feb 2009
Accepted
07 Apr 2009
First published
20 May 2009

Phys. Chem. Chem. Phys., 2009,11, 6234-6241

Molecular configuration transitions of a nematic liquid crystal encapsulated in organically modified silicas

E. Castellón, M. Zayat and D. Levy, Phys. Chem. Chem. Phys., 2009, 11, 6234 DOI: 10.1039/B903926K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements