Issue 22, 2017

Growth of Mg2Si crystals shaped by {100} and {111} facets from Al–Mg–Si melts in the presence of calcium

Abstract

In this work, primary Mg2Si crystals shaped by {100} and {111} facets were successfully fabricated in Al–Mg–Si melts via the adsorption and poisoning of the Ca element. The modifier Ca plays an important role in determining the morphologies of primary Mg2Si, which can be transformed from dendrites (0 wt%) to crystals with a combination of eight {111} and four {100} facets (0.08 wt%), then to truncated cubes (0.1 wt%), and finally to cubes fully bounded by {100} facets (0.2 wt%) with increasing Ca content. The growth processes of cubic primary Mg2Si have been revealed. As the growth rates of {100} surfaces are diminished by adsorption of the Ca element, primary Mg2Si tends to form perfect cubes with exposed {100} facets. Moreover, by prudently adjusting the concentration of the Ca element, complex polyhedral crystals enclosed by {111} and {100} surfaces were designed and prepared. The results offer valuable insights into designing the modification effect of different modifying elements, which are critical to promoting the industrial application of light alloys with improved morphology and refined size of microstructures.

Graphical abstract: Growth of Mg2Si crystals shaped by {100} and {111} facets from Al–Mg–Si melts in the presence of calcium

Article information

Article type
Paper
Submitted
26 Feb 2017
Accepted
15 May 2017
First published
15 May 2017

CrystEngComm, 2017,19, 3058-3062

Growth of Mg2Si crystals shaped by {100} and {111} facets from Al–Mg–Si melts in the presence of calcium

L. Chen, H. Wang, K. Liu, C. Wang, D. Luo and Q. Jiang, CrystEngComm, 2017, 19, 3058 DOI: 10.1039/C7CE00404D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements