A single-phase all-solid-state lithium battery based on Li1.5Cr0.5Ti1.5(PO4)3 for high rate capability and low temperature operation

Atsushi Inoishi; Akira Nishio; Yuto Yoshioka; Ayuko Kitajou; Shigeto Okada

doi:10.1039/C8CC00734A

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

A single-phase all-solid-state lithium battery based on Li_1.5Cr_0.5Ti_1.5(PO₄)₃ for high rate capability and low temperature operation†

Atsushi Inoishi,

*^a Akira Nishio,^b Yuto Yoshioka,^b Ayuko Kitajou^c and Shigeto Okada^c

Author affiliations

* Corresponding authors

^a Department of Applied Chemistry, Faculty of Engineering, Kyushu University, Motoka 744, Nishi-ku, Fukuoka 819-0395, Japan
E-mail: Inoishi_a@cstf.kyushu-u.ac.jp

^b Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, Japan

^c Institute for Materials Chemistry and Engineering, Kyushu University, Japan
E-mail: s-okada@cm.kyushu-u.ac.jp

Abstract

We report a battery made from a single material using Li_1.5Cr_0.5Ti_1.5(PO₄)₃ as the anode, cathode and electrolyte. A high rate capability at room temperature and very low-temperature operation (233 K) were possible as a result of the superior ionic conductivity and low interfacial resistance obtained from the single-phase cell design.

Download options Please wait...

Supplementary files

Supplementary information PDF (1311K)

Article information

DOI: https://doi.org/10.1039/C8CC00734A
Article type: Communication
Submitted: 28 Jan 2018
Accepted: 05 Mar 2018
First published: 06 Mar 2018

Download Citation

Chem. Commun., 2018,54, 3178-3181

Permissions

Request permissions

A single-phase all-solid-state lithium battery based on Li_1.5Cr_0.5Ti_1.5(PO₄)₃ for high rate capability and low temperature operation

A. Inoishi, A. Nishio, Y. Yoshioka, A. Kitajou and S. Okada, Chem. Commun., 2018, 54, 3178 DOI: 10.1039/C8CC00734A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Chemical Communications