Issue 20, 2018

Water transport through graphene oxide membranes: the roles of driving forces

Abstract

Graphene oxide (GO) membranes have shown excellent selectivities in nanofiltration and pervaporation. However, the water transport mechanisms in the unique membrane laminar structure are still not well understood, especially in pervaporation which involves selective permeation and evaporation. Herein, water transport in GO membranes was tested under two different modes: pressure-driven permeation and pervaporation. The pure water flux was found to be 1–2 orders of magnitude higher in pervaporation due to the large capillary pressure induced by evaporation. The water flux in pervaporation was suggested to be limited by evaporation at room temperature but surface diffusion at high temperature.

Graphical abstract: Water transport through graphene oxide membranes: the roles of driving forces

Supplementary files

Article information

Article type
Communication
Submitted
28 Nov 2017
Accepted
11 Jan 2018
First published
21 Feb 2018
This article is Open Access
Creative Commons BY license

Chem. Commun., 2018,54, 2554-2557

Water transport through graphene oxide membranes: the roles of driving forces

J. Y. Chong, B. Wang and K. Li, Chem. Commun., 2018, 54, 2554 DOI: 10.1039/C7CC09120F

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements