Issue 5, 2012

Samplers for VOCs in air based on cyclodextrin–silica hybrid microporous solid phases

Abstract

Samplers for VOCs in air based on cyclodextrinsilica hybrid microporous solid phases are proposed. The solid phase preparation is very easy and inexpensive. Proposed samplers compared with other solid phases present the advantages of a wider range of operative conditions for VOCs desorption. Samplers are tested based on results for the determination of benzene, toluene, ethylbenzene and o-xylene, m-xylene and p-xylene (BTEX) in air. Operational parameters are optimized and quantitative recovery is obtained using a solid phase from 2-hydroxypropyl-β-cyclodextrin and acetonitrile as the extraction solvent. The recoveries obtained are 89 ± 4%, 90 ± 6%, 91 ± 2%, 87.0 ± 0.9%, 88 ± 4%, and 88 ± 4% for benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene, respectively. Moreover results indicate a good reproducibility with a coefficient of variation below 6% and no significant difference between the reproducibility intra-synthesis and inter-synthesis. The proposed procedure has been applied to the determination of BTEX in several contaminated air samples and compared with results provided by a reference method.

Graphical abstract: Samplers for VOCs in air based on cyclodextrin–silica hybrid microporous solid phases

Article information

Article type
Paper
Submitted
06 Nov 2011
Accepted
14 Dec 2011
First published
19 Jan 2012

Analyst, 2012,137, 1275-1283

Samplers for VOCs in air based on cyclodextrinsilica hybrid microporous solid phases

A. R. Mauri-Aucejo, M. Llobat-Estellés, M. G. Egea, C. Guillem and P. Amorós, Analyst, 2012, 137, 1275 DOI: 10.1039/C2AN16065J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements