Chromatographic methods for the determination of the logL16 solute descriptor
Abstract
A squalane packed column and two open-tubular columns coated with an immobilized stationary phase film of poly(dimethylsiloxane) or poly(methyloctylsiloxane) are evaluated as surrogate chromatographic systems for the determination of the logL16 solute descriptor by gas chromatography. Retention on the squalane column is dominated by gas–liquid partitioning with a significant temperature-dependent contribution from interfacial adsorption at the liquid–solid interface. Using the gas–liquid partition coefficient as the dependent model variable allows logL16 to be estimated to ± 0.026 log units over the temperature range 60–120 °C. Without correction for interfacial adsorption a single column estimation of logL16 with phase loadings of 8 to 20% (m/m) over the temperature range 80–120 °C is possible for compounds with moderate hydrogen-bond basicity. The poly(dimethylsiloxane) stationary phase is both dipolar and hydrogen-bond basic and less suitable than the poly(methyloctylsiloxane) stationary phase, which is less cohesive and has similar dipolarity but no hydrogen-bond basicity. The determination of logL16 on the poly(methyloctylsiloxane) column requires prior knowledge of the solute dipolarity/polarizability descriptor to avoid significant errors in the measurement of logL16 for polar compounds. In such circumstances a single column estimation of logL16 over the temperature range 60–140 °C with an error of ±0.05–0.09 log units is possible.