Issue 7, 2000

Determination of N,N-dimethylaminoethyl chloride and the dimethylaziridinium ion at sub-ppm levels in diltiazem hydrochloride by LC-MS with electrospray ionisation

Abstract

An LC–MS method is described for the determination of the synthetic reagent N,N-dimethylaminoethyl chloride (DMC) in the drug substance diltiazem hydrochloride, for which the permissible limit is not more than 1 ppm (μg g−1). The N,N-dimethylaziridinium ion (DMA), the reactive intermediate formed by cyclisation of DMC, is also detected. A column switching arrangement is used: diltiazem hydrochloride is trapped on a reversed-phase HPLC column, and the polar analytes are separated by ion exchange chromatography. Ionisation is effected by positive-ion electrospray, and the quadrupole filter mass spectrometer is operated in the selected ion recording mode. The detection limit (peak height-to-baseline noise ratio = 3) for DMC varies from day to day in the range <0.05 to 0.1 ppm. The response for DMC is linear (r >0.999) over the concentration range 0.2–10 ppm, and the repeatability is better than 7% (relative standard deviation) at 1.0 ppm. Concentrations of DMC in diltiazem hydrochloride from the manufacturing facility under study ranged from undetectable to about 0.07 ppm. An indirect TLC method has been published for the determination of DMC in mepyramine maleate, but it lacks the necessary sensitivity and specificity. The LC-MS method presented is direct, straightforward and suitable for routine use.

Article information

Article type
Paper
Submitted
04 Feb 2000
Accepted
09 May 2000
First published
12 Jun 2000

Analyst, 2000,125, 1255-1259

Determination of N,N-dimethylaminoethyl chloride and the dimethylaziridinium ion at sub-ppm levels in diltiazem hydrochloride by LC-MS with electrospray ionisation

C. R. Lee, M. Hubert, C. N. Van Dau, D. Peter and A. M. Krstulovic, Analyst, 2000, 125, 1255 DOI: 10.1039/B000978O

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements