Issue 8, 1997

Flow-through Cell Based on an Array of Gold Microelectrodes Obtained From Modified Integrated Circuit Chips

Abstract

The construction of a flow-through cell incorporating an array of gold microelectrodes is described and its application to flow injection analysis with amperometric detection is presented. Simple modification of almost any conventional integrated circuit chip, used as an inexpensive source of pre-assembled gold micro-wires, leads to the rapid and successful preparation of arrays of 8–48 elements. The polymeric encapsulation material from the top face of the chip is removed by abrasion until the gold micro-wires (used to interconnect the silicon circuit to the external contact pins of the chip) are disrupted and their transversal (elliptical) sections become exposed. Once polished, the flat and smooth top surface of the gold microelectrode-array chip (MEAC) is provided with a spacer and fitted under pressure against an acrylic block with the reference and auxiliary electrodes, to form the electrochemical (thin-layer) flow cell, while the contact pins are plugged into a standard IC socket. This design ensures autonomous electric contact with each electrode and allows fast dismantling for polishing or substitution. The performance of flow cells with MEACs was investigated utilizing the technique of reverse pulse amperometry without oxygen removal. A method was established for the determination of the copper concentration in sugar cane spirit, regulated by law for beverages. Samples from industrial producers and small-scale (alembic) brewers were compared. With a 24 MEAC, a detection limit of 30 µg l -1 of copper (4.7 × 10 -7 mol l -1 of Cu II for 100 µl injections) was calculated. Routine operation was established at a frequency of 60–90 determinations per hour. Intercomparison with atomic absorption spectrometric determinations resulted in excellent agreement.

Article information

Article type
Paper

Analyst, 1997,122, 843-847

Flow-through Cell Based on an Array of Gold Microelectrodes Obtained From Modified Integrated Circuit Chips

M. A. Augelli, V. B. Nascimento, J. J. Pedrotti, I. G. R. Gutz and L. Angnes, Analyst, 1997, 122, 843 DOI: 10.1039/A701519D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements