Issue 40, 2024

Novel two-dimensional conductive metal–organic framework-based heterostructures for high-performance electro-ionic soft actuators

Abstract

Current ionic artificial muscle technology necessitates a significant technological advancement to achieve increased bending strain, enhanced response rates, and prolonged stability while ensuring consistent and reliable performance across various stimuli. In this study, we aimed to develop an artificial muscle based on a novel nanocomposite composed of ionically cross-linked ZnO@Zn-CAT with poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), showing an ultrafast rise time of less than 1.56 s in DC responses, an extremely large bending strain up to 1.22% in a very low input voltage regime (0.1 to 3 V), a long-term cycling stability of 97% up to 10 000 cycles, markedly reduced phase delay, and a very broad frequency bandwidth up to 20 Hz with good structural reliability under continuous electrical stimuli. Most importantly, the proposed ZnO@Zn-CAT-based soft actuator exhibits a remarkably enhanced strain of 2.38% and a blocking force of 66 mN under an extra 700 nm light stimulation, allowing for the realization of complex next-generation soft robotic devices, including wearable electronics and artificial muscles.

Graphical abstract: Novel two-dimensional conductive metal–organic framework-based heterostructures for high-performance electro-ionic soft actuators

Supplementary files

Article information

Article type
Paper
Submitted
30 Jun 2024
Accepted
20 Aug 2024
First published
18 Sep 2024

J. Mater. Chem. A, 2024,12, 27549-27557

Novel two-dimensional conductive metal–organic framework-based heterostructures for high-performance electro-ionic soft actuators

Y. Wang, S. Li, L. Liu, S. Feng, K. Guan, Y. Shi, F. Sun, X. Wang, Y. Shen, C. Zhang, Q. Liu, T. Li, T. Zhang and S. Qin, J. Mater. Chem. A, 2024, 12, 27549 DOI: 10.1039/D4TA04514A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements