Issue 12, 2024

Assembly of thermostable fused compounds with oxidizers for laser-ignited energetic materials

Abstract

Addressing the delicate balance between the energy and sensitivity of energetic materials has been a prominent research focus. Here, 7,8-dinitropyrazolo[1,5-a][1,3,5]triazine-2,4-diamine (ICM-104) is assembled with oxidizer ions through coulombic interactions, achieving an increase in energy while maintaining relatively low sensitivity. X-ray diffraction results indicated that the two energetic salts have a layered structure different from that of ICM-104, and have high densities of 1.89 and 1.95 g cm−3, which are higher than most other energetic salts. Both have excellent thermal detonation velocity (8813 and 8857 m s−1) and detonation pressure (33.2 and 35.7 GPa), higher than 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) (D: 8795 m s−1, P: 34.9 GPa). Moreover, compound 1 exhibits low mechanical sensitivities (FS > 360 N, IS > 40 J), which has great potential as an insensitive energetic material. In addition, two energetic salts have favorable laser-ignited combustion and propulsion performances, which provide new strategies for the formulation design of solid propellants.

Graphical abstract: Assembly of thermostable fused compounds with oxidizers for laser-ignited energetic materials

Supplementary files

Article information

Article type
Paper
Submitted
04 Jan 2024
Accepted
06 Feb 2024
First published
08 Feb 2024

CrystEngComm, 2024,26, 1738-1746

Assembly of thermostable fused compounds with oxidizers for laser-ignited energetic materials

H. Lv, S. Song, D. Yin, X. Jiang, Y. Li, Z. Li, W. Ao, Y. Wang and Q. Zhang, CrystEngComm, 2024, 26, 1738 DOI: 10.1039/D4CE00006D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements