Issue 7, 2023

Rapid nondestructive assessment of the degrees of sensitization of 5456 aluminum alloys using laser-induced breakdown spectroscopy (LIBS) with multivariate analysis

Abstract

The 5xxx series aluminum (Al)–magnesium (Mg) alloys are extensively used in marine transportation and naval ships due to their high strength-to-weight ratios and great corrosion resistance properties. However, material degradation of the 5xxx alloys occurs over time after exposure to environments at elevated temperatures, referred to as sensitization. Sensitization is characterized by β-phase (Mg2Al3) precipitates along the grain boundaries, which increase the susceptibility to intergranular corrosion (IGC) and stress corrosion cracking (SCC). Therefore, it is important to assess the degree of sensitization (DoS) in modern naval ships, whose structures are primarily made of Al–Mg alloys, to determine whether they have reached a DoS threshold that may require maintenance or repair activities. In this study, laser-induced breakdown spectroscopy (LIBS) with statistical multivariate analysis methods was successfully developed to assess the DoS levels of the 5xxx alloys. LIBS measurements were conducted after chemical etching on 5456 Al–Mg alloy samples with DoS values of 7.1 (unsensitized), 20.2 (indeterminate), and 47.3 (sensitized) mg cm−2, respectively. The statistical multivariate analysis method of principal component and discriminant function analysis (PC-DFA) was used to process the LIBS spectra to establish a calibration model used for prediction of Al alloys with unknown DoS values. For each alloy sample, a total of 400 LIBS spectra were acquired. 350 of them were used to establish the calibration model by PC-DFA and the remaining 50 were used as unknown spectra for external validation of the model established. External validation of the established classification model shows accuracies of 100%, 100%, and 82%, respectively, for predicting tested Al alloy samples with unsensitized, indeterminate, and sensitized DoS values. Successful external validation of the classification model established by PC-DFA indicates the ability for sensitization assessment of 5456 Al alloys with unknown DoS values. The technology developed has the capability for rapid and non-destructive sensitization assessment on site.

Graphical abstract: Rapid nondestructive assessment of the degrees of sensitization of 5456 aluminum alloys using laser-induced breakdown spectroscopy (LIBS) with multivariate analysis

Supplementary files

Article information

Article type
Paper
Submitted
13 Jan 2023
Accepted
17 May 2023
First published
22 May 2023

J. Anal. At. Spectrom., 2023,38, 1494-1500

Author version available

Rapid nondestructive assessment of the degrees of sensitization of 5456 aluminum alloys using laser-induced breakdown spectroscopy (LIBS) with multivariate analysis

L. Liu, X. Huang, H. Dong, A. Mao, P. Li, B. Cui, J. Silvain and Y. Lu, J. Anal. At. Spectrom., 2023, 38, 1494 DOI: 10.1039/D3JA00017F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements