Issue 3, 2023

Efficient monolithic perovskite–Si tandem solar cells enabled by an ultra-thin indium tin oxide interlayer

Abstract

Tandem solar cells are promising for overcoming the theoretical single junction solar cell efficiency limit. Here we report an elegant approach to monolithically integrate perovskites and Si-heterojunction tandem solar cells using an ultra-thin indium tin oxide (ITO) interlayer. It is found that a 1.7 nm ITO interlayer is sufficient to provide the interfacing between the silicon and perovskite subcells with minimum parasitic resistance and efficient trap states for carrier recombination. Thinner ITO interlayers result in discontinuous films while thicker ITO interlayers with improved lateral conductivity are less effective in localising shunts especially for large (≥1 cm2) area tandem cells. Furthermore, it is found that a tandem cell with a 26 nm thick 〈p〉a-Si:H junction in the bottom cell performs better than that with a 13 nm thick junction. When combined with a 1.7 nm ultra-thin ITO layer and a front anti-reflection coating, our champion 1.0 cm2 cell achieved 27.2% power conversion efficiency (PCE) and a fill factor (FF) of 82.4% under reverse scan. This FF is the highest of any perovskite–Si tandem cell. The ultra-thin ITO layer is suitable for large area cells. 24.2% efficiency was demonstrated on an 11.8 cm2 cell. A 21.1% efficient 65.1 cm2 (∼4 inch round) cell was also fabricated. This representative cell shows negligible efficiency loss after 600 hours of continuous 1 sun illumination under MPP tracking. This work provides insights into the role of ultra-thin interfacing ITO layers for monolithic large-area perovskite–Si tandem cells.

Graphical abstract: Efficient monolithic perovskite–Si tandem solar cells enabled by an ultra-thin indium tin oxide interlayer

Supplementary files

Article information

Article type
Paper
Submitted
12 Dec 2022
Accepted
25 Jan 2023
First published
26 Jan 2023

Energy Environ. Sci., 2023,16, 1223-1233

Efficient monolithic perovskite–Si tandem solar cells enabled by an ultra-thin indium tin oxide interlayer

J. Zheng, W. Duan, Y. Guo, Z. C. Zhao, H. Yi, F. Ma, L. Granados Caro, C. Yi, J. Bing, S. Tang, J. Qu, K. C. Fong, X. Cui, Y. Zhu, L. Yang, A. Lambertz, M. Arafat Mahmud, H. Chen, C. Liao, G. Wang, M. Jankovec, C. Xu, A. Uddin, J. M. Cairney, S. Bremner, S. Huang, K. Ding, D. R. McKenzie and A. W. Y. Ho-Baillie, Energy Environ. Sci., 2023, 16, 1223 DOI: 10.1039/D2EE04007G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements