Issue 9, 2022

Sustainable plasma polymer encapsulation materials for organic solar cells

Abstract

The rapid degradation of organic photovoltaics (OPVs) under ambient conditions represents a major limitation to this promising technology. Device encapsulation is an effective approach to increase the lifetime of OPVs. Herein, we report the time and cost-effective synthesis of ultrathin encapsulation materials for OPVs by radio frequency (RF) plasma polymerization from plant extract. The encapsulated device retained 66% and 87% of its initial power conversion efficiency (PCE) and fill factor, respectively, after 90 days under ambient conditions while the reference device degraded within the first month. More interestingly, the open circuit voltage of the encapsulated device was found unchanged after >4.5 months with 70% of its original short circuit current density. The investigated thin films have shown strong absorption in the ultraviolet (UV) range with high transmission exceeding 98% to visible light and can be employed to prevent harmful UV photons from reaching the photoactive layer of the device. Additionally, the synthesized films have revealed a high chemical stability under artificial UV irradiation. Thus, this work presents a solvent-free and room temperature encapsulation method based on sustainable materials to increase the lifetime of OPVs without altering the device performance.

Graphical abstract: Sustainable plasma polymer encapsulation materials for organic solar cells

Supplementary files

Article information

Article type
Paper
Submitted
13 Dec 2021
Accepted
19 Jan 2022
First published
20 Jan 2022

J. Mater. Chem. A, 2022,10, 4683-4694

Sustainable plasma polymer encapsulation materials for organic solar cells

M. S. A. Kamel, M. Oelgemöller and M. V. Jacob, J. Mater. Chem. A, 2022, 10, 4683 DOI: 10.1039/D1TA10608B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements