Issue 5, 2021

Ester-functionalized, wide-bandgap derivatives of PM7 for simultaneous enhancement of photovoltaic performance and mechanical robustness of all-polymer solar cells

Abstract

In this study, two wide-bandgap PM7 polymer derivatives are developed via simple structural modification of the fused-accepting unit by incorporating ester groups on terthiophene at different positions (i.e., two ester groups on the outer thiophenes (PM7 D1) and on the central thiophene (PM7 D2)). This simple modification creates a higher-energy light absorption window, providing better complementary light harvesting with naphthalenediimide-based acceptor, P(NDI2HD-Se). As a result, PM7 D1-based all-polymer solar cells (all-PSCs) exhibit a high power conversion efficiency (PCE) of 9.13%, which outperforms that of the PM7-based all-PSC (PCE = 6.93%). Importantly, the ester structural modification has significant impact on the thin-film mechanical ductility and robustness. For example, elongation properties of PM7 D1 and PM7 D2 pristine films are significantly improved by ca. 2.5 times compared to that of PM7. This result is attributed to the flexible ester groups, which are able to effectively compensate for applied stress. The improved ductile properties of PM7 D1 and PM7 D2 also affect the mechanical ductility of the blend films, leading to 1.5-fold increase in crack onset strain compared with that of the PM7 blend film. Therefore, we demonstrate that the introduction of ester groups in conjugated polymers provides a simple and promising strategy for future stretchable electronics.

Graphical abstract: Ester-functionalized, wide-bandgap derivatives of PM7 for simultaneous enhancement of photovoltaic performance and mechanical robustness of all-polymer solar cells

Supplementary files

Article information

Article type
Paper
Submitted
20 Nov 2020
Accepted
28 Dec 2020
First published
29 Dec 2020

J. Mater. Chem. A, 2021,9, 2775-2783

Author version available

Ester-functionalized, wide-bandgap derivatives of PM7 for simultaneous enhancement of photovoltaic performance and mechanical robustness of all-polymer solar cells

H. You, Austin L. Jones, B. S. Ma, G. Kim, S. Lee, J. Lee, H. Kang, T. Kim, J. R. Reynolds and B. J. Kim, J. Mater. Chem. A, 2021, 9, 2775 DOI: 10.1039/D0TA11320D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements