Issue 2, 2021

DFT studies of the CH4-SCR of NO on Fe-doped ZnAl2O4(100) surface under oxygen conditions

Abstract

The catalytic reduction performance of NO on the surface of Fe-doped ZnAl2O4 (100) was calculated based on DFT. The adsorption of NO and other molecules, the change of reaction energy of CH4 and C2H4 as reducing agents, and the activation energy barrier of CH4 were studied. It was found that the best adsorption energy of NO is −2.166 eV. Compared with Al and Zn sites, doped Fe atoms are better adsorption catalytic sites. At temperatures of 300 K and 600 K, the molecules will move in the direction of the Fe atoms. O2 adsorption will repel NO, reduce its adsorption energy, and cause NO to lose electrons and be oxidized. The reaction enthalpy with CH4 as the reducing agent is −7.02 eV, and with C2H4 is −3.45 eV. Transition state calculations show that O reduces the dissociation barrier of CH4 by about 2 eV. The smaller adsorption energy and negative reaction enthalpy of the product indicate that the iron-doped ZnAl2O4 has a good catalytic NO potential. This also provides a basis for future research on the catalytic mechanism of different hydrocarbons.

Graphical abstract: DFT studies of the CH4-SCR of NO on Fe-doped ZnAl2O4(100) surface under oxygen conditions

Article information

Article type
Paper
Submitted
26 Nov 2020
Accepted
16 Dec 2020
First published
04 Jan 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 927-933

DFT studies of the CH4-SCR of NO on Fe-doped ZnAl2O4(100) surface under oxygen conditions

X. Ren, H. Tan, Q. Jie and J. Liu, RSC Adv., 2021, 11, 927 DOI: 10.1039/D0RA10017J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements