Issue 6, 2021

Pd–In bimetallic nanoparticles supported on chelating resin for nitrate removal from water: high efficiency and low NH4+ selectivity

Abstract

Nitrate pollution in groundwater and surface water is a worldwide challenge. Reduction of nitrate to nitrogen gas according to electrocatalysis or hydrogenation catalysis is a prospective way to remove nitrate from water. A Pd/In bimetallic catalyst supported on chelating resin was prepared by a chemical reduction method in aqueous solution. SEM-EDS, TEM, XRD and XPS analyses revealed that the Pd/In nanoparticles with particle sizes ranging from 10 nm to 200 nm showed a uniform distribution in resin. The prepared M-Pd/In composites showed high nitrate removal efficiency (96%) and low NH4+ selectivity (<2%) when the initial concentration of NO3-N was 100 mg N per L. The coexisting anion, organic matter and initial pH value showed little influence on the nitrate removal ability of the prepared M-Pd/In composites. Hads and NaBH4 could be stored during the preparation process of the Pd/In bimetallic composites, and acted as reducing agents in the nitrate removal process. The prepared M-Pd/In composites showed good nitrate removal ability after recycling 5 times. When they were used to treat actual wastewater, nearly all of the nitrate, nitrite and ammonium were removed from municipal WWTP effluent.

Graphical abstract: Pd–In bimetallic nanoparticles supported on chelating resin for nitrate removal from water: high efficiency and low NH4+ selectivity

Supplementary files

Article information

Article type
Paper
Submitted
12 Jan 2021
Accepted
15 Apr 2021
First published
16 Apr 2021

Environ. Sci.: Water Res. Technol., 2021,7, 1078-1089

Pd–In bimetallic nanoparticles supported on chelating resin for nitrate removal from water: high efficiency and low NH4+ selectivity

Z. Shen, G. Peng, Y. Gao and J. Shi, Environ. Sci.: Water Res. Technol., 2021, 7, 1078 DOI: 10.1039/D1EW00028D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements