Issue 45, 2020

Effect of Zn precursor concentration in the synthesis of rGO/ZnO composites and their photocatalytic activity

Abstract

This work focuses on the synthesis of composite materials based on reduced graphene oxide reinforced with zinc oxide. The zinc precursor concentration was varied, and the effect on the structural, morphological, chemical and photocatalytic properties of the resultant composites was studied. The results show that possible variations in the kinetics of the crystal growth due to the Zn precursor concentration can change the final sizes and morphologies of the ZnO structures anchored in the composite. Two different morphologies, ZnO flowers (rGO/ZnO-flowers) and ZnO rods (rGO/ZnO-rods), were obtained and analyzed. Both composites were synthesized using a microwave-assisted hydrothermal route under the same experimental conditions. They were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and UV-VIS DRS. Both composites presented high adsorption (60–70%) and photocatalytic degradation (ca. 100%) of aqueous methylene blue, which was explained in terms of the excellent coupling between the rGO sheets and the different ZnO morphologies.

Graphical abstract: Effect of Zn precursor concentration in the synthesis of rGO/ZnO composites and their photocatalytic activity

Article information

Article type
Paper
Submitted
21 Jul 2020
Accepted
26 Oct 2020
First published
11 Nov 2020

New J. Chem., 2020,44, 19858-19867

Effect of Zn precursor concentration in the synthesis of rGO/ZnO composites and their photocatalytic activity

A. S. Merlano, L. M. Hoyos, G. J. Gutiérrez, M. A. Valenzuela and Á. Salazar, New J. Chem., 2020, 44, 19858 DOI: 10.1039/D0NJ03683H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements