Issue 70, 2019, Issue in Progress

The inhibition of mild steel corrosion in 0.5 M H2SO4 solution by radish leaf extract

Abstract

The inhibitory effect of radish leaf extract (RLE) on mild steel corrosion in 0.5 M H2SO4 was studied by the weight loss method and the electrochemical method. The results demonstrated that the efficiency of inhibition increased with an increase in the concentration of RLE and decreased with an increase in temperature. The inhibition performance reached 93% with 300 mg L−1 at 298 K. RLE behaved as a mixed-type inhibitor based on the cathode. The inhibition mechanism involved the adsorption of the active ingredients of RLE on the mild steel surface to prevent corrosion. The adsorption followed the Langmuir adsorption isotherm, and physical and chemical adsorption coexisted. The results were supported by SEM, quantum chemical calculations, FTIR and UV-visible spectroscopy analyses.

Graphical abstract: The inhibition of mild steel corrosion in 0.5 M H2SO4 solution by radish leaf extract

Article information

Article type
Paper
Submitted
04 Jun 2019
Accepted
16 Nov 2019
First published
11 Dec 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 40997-41009

The inhibition of mild steel corrosion in 0.5 M H2SO4 solution by radish leaf extract

D. Li, P. Zhang, X. Guo, X. Zhao and Y. Xu, RSC Adv., 2019, 9, 40997 DOI: 10.1039/C9RA04218K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements