Issue 24, 2019, Issue in Progress

The preparation of organophosphorus ligand-modified SBA-15 for effective adsorption of Congo red and Reactive red 2

Abstract

P,P-bis (2-oxooxazolidin-3-yl)-N-(3-(triethoxysilyl)propyl)phosphinic amide (APTES-BOP)-modified SBA-15 (SBA-15-BOP) was prepared by a post-synthesis grafting method for the removal of anionic azo dyes from aqueous solutions. The properties of the prepared adsorbent were characterized by PXRD, FT-IR, SEM, TEM, nitrogen sorption, and elemental analysis. Adsorption equilibrium and adsorption kinetic studies demonstrated that the experimental data fitted well with the Langmuir isotherm model and pseudo-second-order model. According to Langmuir fitting, SBA-15-BOP showed high adsorption capacity for CR and RR2 dyes, with the maximum adsorption capacities of 518.1 mg g−1 and 253.8 mg g−1, respectively. The thermodynamic study indicated that the adsorption processes of CR and RR2 dyes on SBA-15-BOP were spontaneous and exothermal. The prepared SBA-15-BOP can be a promising adsorbent for the removal of anionic dyes from aqueous solutions.

Graphical abstract: The preparation of organophosphorus ligand-modified SBA-15 for effective adsorption of Congo red and Reactive red 2

Supplementary files

Article information

Article type
Paper
Submitted
25 Mar 2019
Accepted
16 Apr 2019
First published
02 May 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 13476-13485

The preparation of organophosphorus ligand-modified SBA-15 for effective adsorption of Congo red and Reactive red 2

F. Zhang, C. Yang, Y. Li, M. Chen, S. Hu and H. Cheng, RSC Adv., 2019, 9, 13476 DOI: 10.1039/C9RA02287B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements