Issue 29, 2019

Accurate quantitative determination of heavy metals in oily soil by laser induced breakdown spectroscopy (LIBS) combined with interval partial least squares (IPLS)

Abstract

Oily soil is harmful to the environment, and heavy metals therein may cause hazards to human health. A rapid detection method for heavy metals in oily soil is needed to provide accurate data support for in situ soil pollution assessment and restoration. In the present study, a laser-induced breakdown spectroscopy (LIBS) technique combined with interval partial least squares (IPLS) was proposed to determine Cu, Zn, Cr and Ni in oily soil samples. In order to obtain a good IPLS model, the full spectrum was divided into 10, 20, 30, 40, 50, 60, 70, 80 and 90 subintervals for IPLS model optimization. The results show that the 30th subinterval from an 80-interval case has the lowest RMSE and the best R2. Compared to the PLS model using the full spectrum, the IPLS model with the 30th subinterval from the 80-interval case as the input variable has higher R2s and lower RMSEs for Cu, Zn, Cr and Ni. The R2 was improved from 0.96 to 0.99, and the RMSE was reduced from 0.03 to 0.01. The calculation speed was increased by about 5 times. The LIBS technique coupled with the IPLS method can quickly and effectively realize the quantitative analysis of heavy metals in oily soil and can even be used for the analysis and control of soil pollution.

Graphical abstract: Accurate quantitative determination of heavy metals in oily soil by laser induced breakdown spectroscopy (LIBS) combined with interval partial least squares (IPLS)

Article information

Article type
Paper
Submitted
16 May 2019
Accepted
27 Jun 2019
First published
27 Jun 2019

Anal. Methods, 2019,11, 3657-3664

Accurate quantitative determination of heavy metals in oily soil by laser induced breakdown spectroscopy (LIBS) combined with interval partial least squares (IPLS)

Y. Ding, G. Xia, H. Ji and X. Xiong, Anal. Methods, 2019, 11, 3657 DOI: 10.1039/C9AY01030K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements