Issue 39, 2018, Issue in Progress

Aqueous supercapacitors based on carbonized silk electrodes

Abstract

Graphitic nitrogen-doped hierarchical porous carbon nanosheets for supercapacitor application were derived from an easily obtained and green silk by simultaneous ZnCl2 activation and FeCl3 graphitization at different heating temperatures. By increasing the heating temperature from 700 to 850 °C, the degree of graphitization and BET surface area rose to their highest levels, while the nitrogen doping content was maintained at 2.24 wt%. Carbonized silk at 850 °C displays a nanosheet morphology and a considerable specific surface area (1285.31 m2 g−1), and it was fabricated into a supercapacitor as an electrode material, exhibiting superior electrochemical performance with a high specific capacitance of 178 F g−1 at 0.5 A g−1 and an excellent rate capability (81% capacitance retention ratio even at 20 A g−1) in 1 mol L−1 H2SO4 electrolyte. A symmetric supercapacitor using carbonized silk at 850 °C as the electrodes has an excellent specific energy of 14.33 W h kg−1 at a power density of 251 W kg−1 operated over a wide voltage range of 2.0 V in aqueous neutral Na2SO4 electrolyte.

Graphical abstract: Aqueous supercapacitors based on carbonized silk electrodes

Supplementary files

Article information

Article type
Paper
Submitted
06 Mar 2018
Accepted
25 May 2018
First published
15 Jun 2018
This article is Open Access
Creative Commons BY license

RSC Adv., 2018,8, 22146-22153

Aqueous supercapacitors based on carbonized silk electrodes

L. Zhang, Z. Meng, Q. Qi, W. Yan, N. Lin and X. Y. Liu, RSC Adv., 2018, 8, 22146 DOI: 10.1039/C8RA01988F

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements