Issue 34, 2017

Engineered nanocarbon mixing for enhancing the thermoelectric properties of a telluride-PEDOT:PSS nanocomposite

Abstract

The thermoelectric properties of telluride nanorods coated with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (Te-PEDOT:PSS) were enhanced by the addition of a small amount of a nanocarbon material such as graphene nanoparticles (GNPs) or small bundled single-walled carbon nanotubes (SSWNTs). In order to apply the nanocarbon composite material to the printing process, soluble Te-PEDOT:PSS was mixed with a small amount of nanocarbon without degrading the thermoelectric performances. The thermoelectric properties of the Te-PEDOT:PSS nanocomposites were greatly improved, especially when a rather small amount of SSWNTs was added to Te-PEDOT:PSS owing to the structural and electrical properties of the SSNWTs. The power factor of Te-PEDOT:PSS films mixed with 0.3 wt% of SSWNTs was optimized to be 206 μW m−1 K−2, with a Seebeck coefficient of 118 μV K−1 and electrical conductivity of 139 S cm−1. The fabricated thermoelectric generator (TEG) with SSWNT-mixed Te-PEDOT:PSS by spray printing showed output power of 126 nW, which is 18 times higher than that of GNP-mixed Te-PEDOT:PSS. Using the SSWNT-mixed Te-PEDOT:PSS solution, a lightweight, flexible, and highly efficient TEG was fabricated by an all-printing process, and it could generate a small amount of electricity with heat from the human body.

Graphical abstract: Engineered nanocarbon mixing for enhancing the thermoelectric properties of a telluride-PEDOT:PSS nanocomposite

Supplementary files

Article information

Article type
Paper
Submitted
17 May 2017
Accepted
03 Jul 2017
First published
05 Jul 2017

J. Mater. Chem. A, 2017,5, 17867-17873

Engineered nanocarbon mixing for enhancing the thermoelectric properties of a telluride-PEDOT:PSS nanocomposite

E. J. Bae, Y. H. Kang, C. Lee and S. Y. Cho, J. Mater. Chem. A, 2017, 5, 17867 DOI: 10.1039/C7TA04280A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements