Jump to main content
Jump to site search

Issue 39, 2015
Previous Article Next Article

Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur

Author affiliations

Abstract

Great efforts have been devoted towards development of rechargeable lithium–sulfur (Li–S) battery designs that offer extended cycling. The poor electronic and ionic conductivity of sulfur and its reduction compounds with lithium, solubility of some sulfides in the most commonly used Li–S electrolyte solvents, and the volume changes that accompany lithiation and delithiation processes in a sulfur cathode, pose significant challenges that have so far impeded commercialization of rechargeable Li–S batteries. We demonstrate that TiS2, which uses an intercalation chemistry and is known for its high rate capability and stable performance as a lithium battery cathode, and sulfur, which has very high capacity (1675 mA h g−1) when coupled in a conversion-based electrochemical reaction with lithium metal, can be combined to produce hybrid cathodes in which the two materials function synergistically in the same electrolyte and within the same working voltage. We further show that co-generation of interconnected S8/TiS2 hybrid foams through thermal reaction of Ti precursor foams and S8 yields 3D hybrid cathode structures in which sulfur is infused into porous TiS2 foams. In galvanostatic electrochemical cycling studies the hybrid cathodes demonstrate high areal specific capacity (9 mA h cm−2) and high retention ratios, even at a relatively large areal mass loading of ∼40 mg sulfur per cm2 and high current density (10 mA cm−2). We attribute the improved performance of the materials to the synergistic effect in which TiS2 not only improves the conductivity and rate capability of the cathode, but exerts a strong affinity for soluble lithium polysulfides, which limit their loss to the electrolyte.

Graphical abstract: Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur

Back to tab navigation

Supplementary files

Publication details

The article was received on 13 Aug 2015, accepted on 26 Aug 2015 and first published on 26 Aug 2015


Article type: Paper
DOI: 10.1039/C5TA06348E
Citation: J. Mater. Chem. A, 2015,3, 19857-19866
  •   Request permissions

    Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur

    L. Ma, S. Wei, H. L. Zhuang, K. E. Hendrickson, R. G. Hennig and L. A. Archer, J. Mater. Chem. A, 2015, 3, 19857
    DOI: 10.1039/C5TA06348E

Search articles by author

Spotlight

Advertisements