Issue 30, 2015

Investigation of hollow nitrogen-doped carbon spheres as non-precious Fe–N4 based oxygen reduction catalysts

Abstract

The development of inexpensive non-precious oxygen reduction catalysts has become one of the most important efforts in polymer electrolyte membrane fuel cells. In this report, we synthesized a non-precious electrocatalyst from a single precursor, iron(III) diethylene triaminepentaacetate, using a heat-treatment effect to prepare an active catalyst. A series of catalysts were prepared at different temperatures leading to different degrees of graphitization, heteroatom content and activity. In 0.1 M KOH electrolyte solution, the oxygen reduction reaction (ORR) onset potential of the HNCS71 catalyst was as high as 0.97 V, and half-wave potentials were only 20 mV lower than those for Pt/C. X-ray absorption measurements of the Fe K-edge showed the structure of Fe–N4 centers, formed in HNCS71, which were responsible for the ORR activity. An alkaline exchange membrane fuel cell fabricated with HNCS71 as the cathode was tested in a H2–O2 single cell and showed a maximum power density of ∼68 mW cm−2. The 100 hour fuel cell durability test of the HNCS71 cathode showed a decay in the current density of about 14% at 0.4 V. Therefore, the HNCS catalyst appears to be a promising new class of non-precious catalysts for fuel cell applications.

Graphical abstract: Investigation of hollow nitrogen-doped carbon spheres as non-precious Fe–N4 based oxygen reduction catalysts

Supplementary files

Article information

Article type
Paper
Submitted
14 Apr 2015
Accepted
15 Jun 2015
First published
16 Jun 2015

J. Mater. Chem. A, 2015,3, 15473-15481

Author version available

Investigation of hollow nitrogen-doped carbon spheres as non-precious Fe–N4 based oxygen reduction catalysts

J. Sanetuntikul, C. Chuaicham, Y. Choi and S. Shanmugam, J. Mater. Chem. A, 2015, 3, 15473 DOI: 10.1039/C5TA02677F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements