Jump to main content
Jump to site search

Issue 25, 2015
Previous Article Next Article

Synthesis of phase-pure and monodisperse iron oxide nanoparticles by thermal decomposition

Author affiliations

Abstract

Superparamagnetic iron oxide nanoparticles (SPIONs) are used for a wide range of biomedical applications requiring precise control over their physical and magnetic properties, which are dependent on their size and crystallographic phase. Here we present a comprehensive template for the design and synthesis of iron oxide nanoparticles with control over size, size distribution, phase, and resulting magnetic properties. We investigate critical parameters for synthesis of monodisperse SPIONs by organic thermal decomposition. Three different, commonly used, iron containing precursors (iron oleate, iron pentacarbonyl, and iron oxyhydroxide) are evaluated under a variety of synthetic conditions. We compare the suitability of these three kinetically controlled synthesis protocols, which have in common the use of iron oleate as a starting precursor or reaction intermediate, for producing nanoparticles with specific size and magnetic properties. Monodisperse particles were produced over a tunable range of sizes from approximately 2–30 nm. Reaction parameters such as precursor concentration, addition of surfactant, temperature, ramp rate, and time were adjusted to kinetically control size and size-distribution, phase, and magnetic properties. In particular, large quantities of excess surfactant (up to 25 : 1 molar ratio) alter reaction kinetics and result in larger particles with uniform size; however, there is often a trade-off between large particles and a narrow size distribution. Iron oxide phase, in addition to nanoparticle size and shape, is critical for establishing magnetic properties such as differential susceptibility (dm/dH) and anisotropy. As an example, we show the importance of obtaining the required size and iron oxide phase for application to Magnetic Particle Imaging (MPI), and describe how phase purity can be controlled. These results provide much of the information necessary to determine which iron oxide synthesis protocol is best suited to a particular application.

Graphical abstract: Synthesis of phase-pure and monodisperse iron oxide nanoparticles by thermal decomposition

Back to tab navigation

Publication details

The article was received on 13 Mar 2015, accepted on 30 May 2015 and first published on 03 Jun 2015


Article type: Paper
DOI: 10.1039/C5NR01651G
Author version available: Download Author version (PDF)
Citation: Nanoscale, 2015,7, 11142-11154
  •   Request permissions

    Synthesis of phase-pure and monodisperse iron oxide nanoparticles by thermal decomposition

    R. Hufschmid, H. Arami, R. M. Ferguson, M. Gonzales, E. Teeman, L. N. Brush, N. D. Browning and K. M. Krishnan, Nanoscale, 2015, 7, 11142
    DOI: 10.1039/C5NR01651G

Search articles by author

Spotlight

Advertisements