Jump to main content
Jump to site search

Issue 4, 2014
Previous Article Next Article

Role of the interface on the magnetoelectric properties of BaTiO3 thin films deposited on polycrystalline Ni foils

Author affiliations

Abstract

BaTiO3 (BTO) thin films were deposited on polycrystalline Ni foils using a chemical solution approach. We show that the interface between the BTO film and the Ni foil plays a critical role in determining the magnetoelectric (ME) properties of this flexible assembly, which is likely to be related to the evolution of nickel oxide at the interface during the growth of BTO films. Our results have demonstrated that not only a well-controlled interface between the BTO film and the Ni substrate can be achieved, but also an ME voltage coefficient as large as 90 mV cm−1 Oe−1 can be accomplished.

Graphical abstract: Role of the interface on the magnetoelectric properties of BaTiO3 thin films deposited on polycrystalline Ni foils

Back to tab navigation
Please wait while Download options loads

Publication details

The article was received on 10 Aug 2013, accepted on 31 Oct 2013 and first published on 01 Nov 2013


Article type: Paper
DOI: 10.1039/C3TC31571A
Citation: J. Mater. Chem. C, 2014,2, 708-714
  •   Request permissions

    Role of the interface on the magnetoelectric properties of BaTiO3 thin films deposited on polycrystalline Ni foils

    W. Liang, Z. Li, Z. Bi, T. Nan, H. Du, C. Nan, C. Chen, Q. Jia and Y. Lin, J. Mater. Chem. C, 2014, 2, 708
    DOI: 10.1039/C3TC31571A

Search articles by author