Issue 14, 2014

Embedded CdS nanorod arrays in PbS absorber layers: enhanced energy conversion efficiency in bulk heterojunction solar cells

Abstract

Oriented and high-density n-type CdS nanorod arrays were successfully embedded in p-type PbS absorber layers by a facile and low-cost hydrothermal method and a chemical bath deposition method. The structural, optical and electrical properties of these samples were examined, and the results demonstrated that the high quality three-dimensional heterostructure was obtained. Further investigation revealed that the three-dimensional heterostructure possessed superior optical absorption property due to the optical scattering from the nanorod array. In addition, photovoltaic property measurements demonstrated that the energy conversion efficiency of the novel three-dimensional heterojunction solar cell was increasing by 35% in comparison with the standard planar heterojunction solar cell. The observed improvement is mostly attributed to the three-dimensional heterostructure enabling increased heterojunction area, improved charge carrier collection and enhanced optical absorption ability. This study demonstrates that the three-dimensional heterostructure has potential application in thin film solar cells, and the solution process represents a promising technique for large-scale fabrication of these novel solar cells.

Graphical abstract: Embedded CdS nanorod arrays in PbS absorber layers: enhanced energy conversion efficiency in bulk heterojunction solar cells

Supplementary files

Article information

Article type
Paper
Submitted
27 Sep 2013
Accepted
02 Jan 2014
First published
07 Jan 2014

RSC Adv., 2014,4, 7178-7184

Embedded CdS nanorod arrays in PbS absorber layers: enhanced energy conversion efficiency in bulk heterojunction solar cells

M. Sun, W. Fu, Q. Li, G. Yin, K. Chi, J. Ma, L. Yang, Y. Mu, Y. Chen, S. Su, W. Zhang and H. Yang, RSC Adv., 2014, 4, 7178 DOI: 10.1039/C3RA45446K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements