Issue 19, 2014

In situ synthesis of zeolitic imidazolate frameworks/carbon nanotube composites with enhanced CO2 adsorption

Abstract

A series of ZIF-8 and hydroxyl-functionalized carbon nanotube (CNT) composites were successfully synthesized by the solvothermal method. The obtained ZIF-8/CNT composites were characterized by XRD, SEM, TGA and N2 adsorption at 77 K. The contents of ZIF-8 and CNTs in the composites were calculated from thermal analysis data. CO2 and N2 adsorption at 273 K on the composites was also investigated and compared. The ZIF-8 particles in the composites exhibit similar crystal structures and morphology to those of pure ZIF-8, but display enhanced thermal stability. The surface areas and pore volumes of the ZIF-8/CNT composites are higher than the values calculated for hypothetical physical mixtures, and the synergetic effect between ZIF-8 and CNTs can be proposed. This phenomenon demonstrates that the incorporation of CNTs into ZIF-8 can facilitate the nucleation and crystallization of ZIF-8. As a result, the composites with an optimal CNT content (3.63 wt%) show improved CO2 adsorption capacity and higher relative selectivity for CO2/N2 compared with pure ZIF-8.

Graphical abstract: In situ synthesis of zeolitic imidazolate frameworks/carbon nanotube composites with enhanced CO2 adsorption

Supplementary files

Article information

Article type
Paper
Submitted
12 Nov 2013
Accepted
04 Mar 2014
First published
05 Mar 2014

Dalton Trans., 2014,43, 7028-7036

In situ synthesis of zeolitic imidazolate frameworks/carbon nanotube composites with enhanced CO2 adsorption

Y. Yang, L. Ge, V. Rudolph and Z. Zhu, Dalton Trans., 2014, 43, 7028 DOI: 10.1039/C3DT53191K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements