Jump to main content
Jump to site search
PLANNED MAINTENANCE Close the message box

Scheduled maintenance upgrade on Thursday 4th of May 2017 from 8.00am to 9.00am (BST).

During this time our websites will be offline temporarily. If you have any questions please use the feedback button on this page. We apologise for any inconvenience this might cause and thank you for your patience.


Issue 33, 2014
Previous Article Next Article

An ionic liquid lubricant enables superlubricity to be “switched on” in situ using an electrical potential

Author affiliations

Abstract

Atomic force microscopy measurements reveal that superlubricity can be “switched” on and off in situ when an ionic liquid is used to lubricate the silica–graphite interface. Applying a potential to the graphite surface changes the ion composition of the boundary layer and thus the lubricity. At positive potentials, when the interfacial ion layer is anion rich, friction falls to ultra-low levels.

Graphical abstract: An ionic liquid lubricant enables superlubricity to be “switched on” in situ using an electrical potential

Back to tab navigation
Please wait while Download options loads

Supplementary files

Publication details

The article was received on 06 Feb 2014, accepted on 13 Mar 2014 and first published on 13 Mar 2014


Article type: Communication
DOI: 10.1039/C4CC00979G
Citation: Chem. Commun., 2014,50, 4368-4370
  •   Request permissions

    An ionic liquid lubricant enables superlubricity to be “switched on” in situ using an electrical potential

    H. Li, R. J. Wood, M. W. Rutland and R. Atkin, Chem. Commun., 2014, 50, 4368
    DOI: 10.1039/C4CC00979G

Search articles by author