Jump to main content
Jump to site search

Issue 47, 2013
Previous Article Next Article

Controlled synthesis of tellurium nanowires and nanotubes via a facile, efficient, and relatively green solution phase method

Author affiliations

Abstract

Single-crystal trigonal tellurium nanowires and nanotubes were synthesized using a facile, efficient, and relatively green solution phase method with ethylene glycol as solvent and an alternative reducing agent in the presence of NaOH. Large-scale production of slender nanowires and hollow nanotubes with average diameters of 72 and 240 nm, respectively, was achieved by increasing the temperature from 170 °C to 200 °C. Tellurium morphology from nanowires to nanotubes was also controlled by adjusting the NaOH dosage. Scanning electron micrographs show that low temperature or NaOH insufficiency promotes the formation of slender nanowires but counteracts the synthesis of tellurium nanotubes. Detailed reaction equations based on the NaOH dosage were obtained. Preferential growth orientation of [001] was observed in the nanowire and nanotube through high-resolution transmission electron microscopy. Further formation mechanisms dependent on time were systematically studied.

Graphical abstract: Controlled synthesis of tellurium nanowires and nanotubes via a facile, efficient, and relatively green solution phase method

Back to tab navigation

Publication details

The article was received on 06 Aug 2013, accepted on 08 Oct 2013 and first published on 11 Oct 2013


Article type: Paper
DOI: 10.1039/C3TA13035E
Citation: J. Mater. Chem. A, 2013,1, 15046-15052
  •   Request permissions

    Controlled synthesis of tellurium nanowires and nanotubes via a facile, efficient, and relatively green solution phase method

    Z. Li, S. Zheng, Y. Zhang, R. Teng, T. Huang, C. Chen and G. Lu, J. Mater. Chem. A, 2013, 1, 15046
    DOI: 10.1039/C3TA13035E

Search articles by author

Spotlight

Advertisements