Issue 4, 2013

Buffer-gas assisted high irradiance femtosecond laser ionization orthogonal time-of-flight mass spectrometry for rapid depth profiling

Abstract

High irradiance femtosecond laser ionization orthogonal time-of-flight mass spectrometry (fs-LI-O-TOFMS) has been applied for the depth profile analysis of multilayer samples. Elements in each layer can be determined with respect to the depth of solid sample surfaces. A nanosecond laser was also applied in parallel for comparison. The analytical performances as well as crater formation mechanisms of femtosecond and nanosecond laser ablation and ionization were compared. Superiorities of the depth resolution and trace elemental detection were observed in the femtosecond laser mode. fs-LI-O-TOFMS is capable of presenting the complete and explicit spectrum for each laser shot, performing depth profiling of coated layers with various thicknesses (tens of nanometers to tens of micrometers), providing multi-elemental information, and examining samples with conductive and nonconductive substrates.

Graphical abstract: Buffer-gas assisted high irradiance femtosecond laser ionization orthogonal time-of-flight mass spectrometry for rapid depth profiling

Article information

Article type
Technical Note
Submitted
12 Oct 2012
Accepted
20 Dec 2012
First published
21 Dec 2012

J. Anal. At. Spectrom., 2013,28, 499-504

Buffer-gas assisted high irradiance femtosecond laser ionization orthogonal time-of-flight mass spectrometry for rapid depth profiling

M. He, B. Li, S. Yu, B. Zhang, Z. Liu, W. Hang and B. Huang, J. Anal. At. Spectrom., 2013, 28, 499 DOI: 10.1039/C2JA30288H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements