Issue 35, 2012

Fluoride-assisted galvanic replacement synthesis of Ag and Au dendrites on aluminum foil with enhanced SERS and catalytic activities

Abstract

Although Al has a lower redox potential [Al3+/Al, −1.67 V vs. SHE] than most metallic ions, metal galvanic replacement reactions on pure aluminum foil can be hardly observed because of the existence of the thin layer of aluminum oxide, In this work, we develop a facile, economical and general approach to achieve large-scale production of silver and gold dendrites as well as other metal hierarchical micro/nanostructures (Cu, Pt, Pd, Ni, Co and Zn) on commercial aluminum foil in the presence of NaF or NH4F. Studies of the galvanic replacement reaction by open circuit potential–time (OCP–t) measurements demonstrate that fluoride plays an important role in etching the alumina layer and thus induces the continuous proceeding of the galvanic replacement reaction. The synthesis process is carried out at room temperature and without any templates, surfactants, or special reagents. The obtained silver and gold dendrites show significantly enhanced SERS signals of a self-assembled monolayer of 2-naphthalenethiol and 4-mercaptobenzoic acid, and also could effectively catalyze the reduction reaction of 4-nitrophenol and 2-nitrophenol at room temperature.

Graphical abstract: Fluoride-assisted galvanic replacement synthesis of Ag and Au dendrites on aluminum foil with enhanced SERS and catalytic activities

Supplementary files

Article information

Article type
Paper
Submitted
07 Apr 2012
Accepted
19 Jul 2012
First published
20 Jul 2012

J. Mater. Chem., 2012,22, 18327-18334

Fluoride-assisted galvanic replacement synthesis of Ag and Au dendrites on aluminum foil with enhanced SERS and catalytic activities

W. Ye, Y. Chen, F. Zhou, C. Wang and Y. Li, J. Mater. Chem., 2012, 22, 18327 DOI: 10.1039/C2JM32170J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements