Graphene oxide based conductive glue as a binder for ultracapacitor electrodes

Jiayan Luo; Vincent C. Tung; Andrew R. Koltonow; Hee Dong Jang; Jiaxing Huang

doi:10.1039/C2JM30819C

Graphene oxide based conductive glue as a binder for ultracapacitor electrodes

Jiayan Luo,^a Vincent C. Tung,^a Andrew R. Koltonow,^a Hee Dong Jang*^a^b and Jiaxing Huang*^a

* Corresponding authors

^a Department of Materials Science and Engineering, Northwestern University, Evanston, USA
E-mail: Jiaxing-huang@northwestern.edu

^b Department of Industrial Materials Research, Korea Institute of Geoscience and Mineral Resources, Yuseong-gu, Daejeon 305-350, Korea
E-mail: hdjiang@kigam.re.kr

Abstract

An adhesive and conductive glue was created by synergistic assembly of graphene oxide (GO), single walled carbon nanotubes (SWCNTs) and conjugate polymer PEDOT:PSS in aqueous solution. The GO–SWCNTs–PEDOT:PSS glue can be used as a binder to fabricate metal oxide nanoparticle based ultracapacitors. Since the functional nanoparticles are immersed in this conductive gel, uniform electrical and mechanical interconnect can be achieved, leading to enhanced performance of ultracapacitors.

Supplementary files

Publication details

The article was received on 10 Feb 2012, accepted on 03 May 2012 and first published on 04 May 2012

Article type: Communication

DOI: 10.1039/C2JM30819C

Citation: J. Mater. Chem., 2012,22, 12993-12996

Request permissions
Graphene oxide based conductive glue as a binder for ultracapacitor electrodes

J. Luo, V. C. Tung, A. R. Koltonow, H. D. Jang and J. Huang, J. Mater. Chem., 2012, 22, 12993
DOI: 10.1039/C2JM30819C
If you are not the author of this article and you wish to reproduce material from it in a third party non-RSC publication you must formally request permission using RightsLink. Go to our Instructions for using RightsLink page for details.

Authors contributing to RSC publications (journal articles, books or book chapters) do not need to formally request permission to reproduce material contained in this article provided that the correct acknowledgement is given with the reproduced material.

Reproduced material should be attributed as follows:
For reproduction of material from NJC:
Reproduced from Ref. XX with permission from the Centre National de la Recherche Scientifique (CNRS) and The Royal Society of Chemistry.

For reproduction of material from PCCP:
Reproduced from Ref. XX with permission from the PCCP Owner Societies.

For reproduction of material from PPS:
Reproduced from Ref. XX with permission from the European Society for Photobiology, the European Photochemistry Association, and The Royal Society of Chemistry.

For reproduction of material from all other RSC journals and books:
Reproduced from Ref. XX with permission from The Royal Society of Chemistry.
If the material has been adapted instead of reproduced from the original RSC publication "Reproduced from" can be substituted with "Adapted from".

In all cases the Ref. XX is the XXth reference in the list of references.

If you are the author of this article you do not need to formally request permission to reproduce figures, diagrams etc. contained in this article in third party publications or in a thesis or dissertation provided that the correct acknowledgement is given with the reproduced material.

Reproduced material should be attributed as follows:
For reproduction of material from NJC:
[Original citation] - Reproduced by permission of The Royal Society of Chemistry (RSC) on behalf of the Centre National de la Recherche Scientifique (CNRS) and the RSC

For reproduction of material from PCCP:
[Original citation] - Reproduced by permission of the PCCP Owner Societies

For reproduction of material from PPS:
[Original citation] - Reproduced by permission of The Royal Society of Chemistry (RSC) on behalf of the European Society for Photobiology, the European Photochemistry Association, and RSC

For reproduction of material from all other RSC journals:
[Original citation] - Reproduced by permission of The Royal Society of Chemistry
If you are the author of this article you still need to obtain permission to reproduce the whole article in a third party publication with the exception of reproduction of the whole article in a thesis or dissertation.

Information about reproducing material from RSC articles with different licences is available on our Permission Requests page.

Journal of Materials Chemistry

Graphene oxide based conductive glue as a binder for ultracapacitor electrodes

Abstract

Supplementary files

Publication details

Graphene oxide based conductive glue as a binder for ultracapacitor electrodes

Search articles by author

Spotlight

Advertisements