Issue 2, 2011

Green electrochemical approach for delignification of wheat straw in second-generation bioethanol production

Abstract

Ethanol is considered as one of the most promising next-generation automotive fuels, as it is carbon-neutral and can be produced from renewable resources, like lignocellulosic materials. However, owing to biomass characteristics, some technological barriers, such as delignification pretreatment, need to be addressed for an efficient conversion of wood to bioethanol. This paper describes a mild and harmless delignification of wheat straw, carried out at room temperature and requiring only 10 min, using an environmentally-friendly HOCl-containing electrochemically activated water solution, synthesized from diluted brines. Holocellulose (i.e. the sum of cellulose and hemicellulose) rich materials can be obtained with approximately 64% reduction of the initial lignin content. Both the absence of lignin degradation products, which could act as inhibitors during fermentation, and a promising, non-optimized ethanol yield (68% w/w on theoretical value) confirm the potential of this alternative approach towards resolving the challenges to develop a sustainable and low-cost process.

Graphical abstract: Green electrochemical approach for delignification of wheat straw in second-generation bioethanol production

Article information

Article type
Paper
Submitted
05 Jul 2010
Accepted
04 Nov 2010
First published
17 Dec 2010

Energy Environ. Sci., 2011,4, 551-557

Green electrochemical approach for delignification of wheat straw in second-generation bioethanol production

E. Tamburini, T. Bernardi, G. Castaldelli, G. Tumiatti and S. Ferro, Energy Environ. Sci., 2011, 4, 551 DOI: 10.1039/C0EE00226G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements