Issue 7, 2009

Hydrogenolysis of glycerol catalyzed by Ru-Cu bimetallic catalysts supported on clay with the aid of ionic liquids

Abstract

Glycerol is a well-known renewable chemical, and its effective transformation to valuable chemicals accords well with the principles of green chemistry. In this work, a series of Ru-Cu bimetallic catalysts were prepared using cheap and abundant clay, bentonite, as the support. Bentonite was modified with a functional ionic liquid 1,1,3,3-tetramethylguanidinium lactate (TMGL) in an attempt to develop highly efficient catalysts. Hydrogenolysis of aqueous solution of glycerol was performed with the immobilized Ru-Cu catalyst under temperatures of 190–240 °C and pressures of 2.5–10 MPa. The bimetallic catalysts were very efficient for promoting the hydrogenolysis of glycerol. 100% of glycerol conversion and 85% yield of 1,2-propanediol could be achieved at 230 °C and 8 MPa. The conversion of glycerol and the selectivity to 1,2-propanediol did not decrease after the catalyst was used 5 times. TMGL played a crucial role in fabricating the new catalysts. The catalysts were characterized by FT-IR, XPS, SEM and TEM, and the reasons for the excellent performances of the catalyst were also discussed.

Graphical abstract: Hydrogenolysis of glycerol catalyzed by Ru-Cu bimetallic catalysts supported on clay with the aid of ionic liquids

Article information

Article type
Paper
Submitted
22 Jan 2009
Accepted
25 Mar 2009
First published
09 Apr 2009

Green Chem., 2009,11, 1000-1006

Hydrogenolysis of glycerol catalyzed by Ru-Cu bimetallic catalysts supported on clay with the aid of ionic liquids

T. Jiang, Y. Zhou, S. Liang, H. Liu and B. Han, Green Chem., 2009, 11, 1000 DOI: 10.1039/B901425J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements