Jump to main content
Jump to site search

Issue 21, 2006
Previous Article Next Article

Particle-surface capillary forces with disjoining pressure

Author affiliations

Abstract

A new, atomic force microscopy (AFM) based experimental setup for the continuous acquisition of friction force data as a function of humidity has been developed. The current model of interactions between wet contacts under the influence of capillary effects, has been amended to include a vertical component due to the disjoining pressure and takes into account the influence of liquid films adsorbed on the surface. This is a ‘switching’ model, i.e. the contact between nanometer-sized sphere and a flat surface can exist in two distinct states due to capillary bridge formation/destruction as the humidity is varied. The model has been qualitatively verified on samples of differing wettability produced by UV-ozone treatment of polystyrene (PS). Results of AFM analysis of the friction vs. vapor pressure curves collected from the surface are presented. Correlation between important surface properties such as wettability, adsorption, and contact angle and friction force under varying humidity were found and discussed.

Graphical abstract: Particle-surface capillary forces with disjoining pressure

Back to tab navigation

Publication details

The article was received on 10 Feb 2006, accepted on 31 Mar 2006 and first published on 28 Apr 2006


Article type: Paper
DOI: 10.1039/B602005D
Citation: Phys. Chem. Chem. Phys., 2006,8, 2525-2530
  •   Request permissions

    Particle-surface capillary forces with disjoining pressure

    G. V. Lubarsky, M. R. Davidson and R. H. Bradley, Phys. Chem. Chem. Phys., 2006, 8, 2525
    DOI: 10.1039/B602005D

Search articles by author

Spotlight

Advertisements