Jump to main content
Jump to site search
PLANNED MAINTENANCE Close the message box

Scheduled maintenance upgrade on Thursday 4th of May 2017 from 8.00am to 9.00am (BST).

During this time our websites will be offline temporarily. If you have any questions please use the feedback button on this page. We apologise for any inconvenience this might cause and thank you for your patience.


Issue 3, 2002
Previous Article Next Article

Low-flow active and passive sampling of VOCs using thermal desorption tubes: theory and application at an offset printing facility

Author affiliations

Abstract

While air sampling techniques using adsorbent-based collection, thermal desorption and chromatographic analysis have found a niche in ambient air sampling, occupational applications have been more limited. This paper evaluates the use of thermal desorption techniques for low flow active and passive sampling configurations which allow conveniently long duration sampling in occupational settings and other high concentration environments. The use of an orifice enables flows as low as 0.5 ml min−1 and sampling periods up to several days without significant biases. A model is used to predict sampling rates of a passive sampler encompassing an orifice, a void space, glass wool, and the adsorbent. Laboratory and field tests conducted at a commercial offset printing facility, which contained a variety of volatile organic compounds (primarily aromatic but also a few chlorinated and terpene compounds at levels from 1 to 67,000 µg m−3), are used to evaluate the approach. Tenax GR and Carbosieve SIII, both singly and together, were employed as adsorbents. Side-by-side tests comparing high flow, low flow and passive samplers show excellent agreement and high linearity (r = 0.95) for concentrations spanning nearly five orders of magnitude. Active samplers were tested at flows as low as 0.5 ml min−1, compared to typical flows up to 40 ml min−1. Passive samplers demonstrated a linear range and agreement with predictions for adsorbate loadings from ∼1 ng to nearly 10 µg. Using a chemical mass balance receptor model, concentrations in the facility were apportioned to solvents, inks and other indoor and outdoor sources. Overall, the use of low flow active and passive sampling approaches employing thermal desorption techniques provides good performance and tremendous flexibility that facilitates use in many applications, including workplace settings.

Back to tab navigation
Please wait while Download options loads

Publication details

The article was received on 03 Apr 2002, accepted on 04 Apr 2002 and first published on 01 May 2002


Article type: Paper
DOI: 10.1039/B203289A
Citation: J. Environ. Monit., 2002,4, 361-370
  •   Request permissions

    Low-flow active and passive sampling of VOCs using thermal desorption tubes: theory and application at an offset printing facility

    S. Batterman, T. Metts, P. Kalliokoski and E. Barnett, J. Environ. Monit., 2002, 4, 361
    DOI: 10.1039/B203289A

Search articles by author