Issue 10, 1999

EDTA as the modifier for the determination of Cd, Hg and Pb in fish by slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry

Abstract

Ultrasonic slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry (USS-ETV-ICP-MS) has been applied to the determination of Cd, Hg and Pb in several fish samples. The influences of the instrument operating conditions and slurry preparation on the ion signals were reported. In this study, a relatively low vaporization temperature was used which separated the analyte from the major matrix components and improved the ion signals significantly. EDTA was used as the modifier to enhance the ion signals. Since the sensitivities of Cd, Hg and Pb in various fish slurries and aqueous solution were quite different, the standard addition method and isotope dilution method were used for the determination of Cd, Hg and Pb in these fish samples. This method has been applied to the determination of Cd, Hg and Pb in dogfish muscle reference material (DORM-2) and a swordfish sample purchased from the market. The analysis results agreed with the certified values. The precision between sample replicates was better than 14% with the USS-ETV-ICP-MS method. Detection limits estimated from standard addition curves were about 3-6, 3-9 and 6-7 ng g –1 for Cd, Hg and Pb, respectively, in different samples.

Article information

Article type
Paper

J. Anal. At. Spectrom., 1999,14, 1583-1588

EDTA as the modifier for the determination of Cd, Hg and Pb in fish by slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry

H. Liao and S. Jiang, J. Anal. At. Spectrom., 1999, 14, 1583 DOI: 10.1039/A905328J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements