Correction: Electrowetting without external voltage using paint-on electrodes
Abstract
Correction for ‘Electrowetting without external voltage using paint-on electrodes’ by Collin B. Eaker et al., Lab Chip, 2017, DOI: 10.1039/c6lc01500j.
Maintenance work is planned for Wednesday 1st May 2024 from 9:00am to 11:00am (BST).
During this time, the performance of our website may be affected - searches may run slowly and some pages may be temporarily unavailable. If this happens, please try refreshing your web browser or try waiting two to three minutes before trying again.
We apologise for any inconvenience this might cause and thank you for your patience.
* Corresponding authors
a
Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695-7905, USA
E-mail:
mddickey@ncsu.edu
b Department of Electrical Engineering and Computing Systems, University of Cincinnati, Cincinnati, OH 45221-0030, USA
Correction for ‘Electrowetting without external voltage using paint-on electrodes’ by Collin B. Eaker et al., Lab Chip, 2017, DOI: 10.1039/c6lc01500j.
C. B. Eaker, I. D. Joshipura, L. R. Maxwell, J. Heikenfeld and M. D. Dickey, Lab Chip, 2017, 17, 1359 DOI: 10.1039/C7LC90029E
This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content